Progressive Block PB Series
It is a simpler series where discharge cannot be altered. It is fixed (0.4gm/point/stroke). The width and height of this block are 95 and 85 mm respectively. Inlet port size of this block is 1/4" BSP and outlet suitable for 6mm OD tube. indicator Pin can be provided as optional. Any outlet port if not in use, cannot be unlocked, under any circumstances. SIMA is a main supplier of such accessories in major parts of South India. The available models are PB-6, PB-8, PB-10 and PB-12.
|Model-PB-6||:||No. of Outlets-6|
Length in mm-95
|Model-PB-8||:||No. of Outlets-8|
Length in mm-120
|Model-PB-10||:||No. of Outlets-10|
Length in mm-150
|Model-PB-12||:||No. of Outlets-12|
Length in mm-175
Progressive Block LPB Series
With a competent team of hard working professionals, we are able to offer Progressive Block LPB-Series. These products offered by us are made utilizing high grade raw material and innovative technology in strict compliance with the industry laid norms and standards by vendors. Along with this, the offered range is suitably checked on different parameters to maintain its authenticity throughout the designing process.
- These are stage type block with variable discharge ranging from 0.15-1.00cc/ stroke
- These block are available in 4,6,8,10 and 12 port versions with two different modes LPB-4555 and LPB-6080
- In case some ports to be blocked, it is possible with the help of bridges or internal screw taking out
- Inlet/outlet port sizes are 1/8" or 1/4" BSP
Electrical Cycle Indicator
It is a reed micro switch ; when excited from a magnet at the end of the piston section, produces a signal which confirms end of the cycle. It is NA contact ( 20W-0, 5-200 V commutable voltage).Types and dimensions
|Maximum Pressure||70 kg/cm2|
|Recommended grease||NLGI No 00-1.2|
|Discharge amount||0.1, 0.14, 0.18, 0.24, 0.3|
|Min. number of ports||3|
|Max. number of ports||12|
Master Progressive Block Series- DPZ
In case number of lubrication points to be fed are many i.e. more than 12 nos. It is advisable to use master block as primary feeder. Lubrication line from master block shall be connected to secondary block from where lubrication points are joined. The discharge of master block is more than the secondary block. Master Block has pressure indicating pin in each line. In case of over pressure, pressure indicating pin comes out. This happens when the line coming out from the master block get chocked.
|Series||No. of points||Discharge/Outlet|
|DPZ 6||6||0.8-1.5 cc/cycle|
Progressive Block Accessories
DPK series is a complicated block. DPK series are the units with smallest metering capacity in the System. Working pressure in this case is 125 kgs/cm2 .
Stag (Element) can be selected depending upon discharge requirements.
Inlet port size : 1/4" BSP
Outlet port size : 1/8" BSP on the left side and right side only. Types And Characteristics:
Elements and Capacities:
|Part number||Max. no. of outlets||Dimensions|
|Double Outlet||Single Outlet (1)|
|Part Number||Capacity/ccs||Part Number||Capacity/ccs|
|KD* 008||0,08||KS* 008||0,16|
|KD* 012||0.12||KS* 012||0,24|
|KD* 016||0,16||KS* 016||0,32|
|KD* 020||0,20||KS* 020||0,40|
|KD* 024||0,24||KS* 024||0,48|
|KD* 028||0,28||KS* 028||0,56|
|KD* 032||0,32||KS* 032||0,64|
Progressive Block Secondary Series - DPX
In this series discharge of block is . 1 to .4 cc/cycle adjustable. This block can be directly attached to the pump and can feed upto 12 lubrication points (maximum). These blocks are available in 6, 8, 10 & 12 outlets version. If the no. of lubrication points in machine are quite many, in combination with master block, secondary block of DPX are to be used.Types And Dimensions:
We are an eminent name, which is engaged in offering Progressive Block AR-Series to the clients. The offered range is made utilizing high grade raw material and innovative technology in strict compliance with the industry laid norms. Along with this, the offered range is available in different customized specifications and forms as per the diverse requirements of esteemed clients.
- These are progressive type meting divider block having one input port for oil/grease and multi-outlet for distribution.
- Once the lubricant is fed under pressure, individual outlet port ejects metered amount of lubricant progressively.
- The discharge of these blocks are 0.3 cc/stroke fixed
- However bridge are available for joining 2 ports together.